Acta Univ. Agric. Silvic. Mendelianae Brun. 2015, 63(5), 1477-1483 | DOI: 10.11118/actaun201563051477

Analysis of Properties of Hard Coatings and Wear Resistance of Chemical Vapour Deposition (PVD) Coated Technology

Pavel Hudeček, Petr Dostál
Department of Technology and Automobile Transport, Faculty of Agronomy, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic

Modern coating methods are having become an important part of industry. Wear resistance, durability, toughness (breakage resistance) and hot hardness (high hardness and chemical stability at high temperature) are the four main technological properties necessary for durability and long life time. These proprieties are for productivity, economy and ecology very important point.
This resource deals with the analysis of properties of hard coatings and wear resistance of chemical vapour deposition (PVD) coated technology. It focuses on the preparation, execution and evaluation of test coatings on the front ball-milling cutters. Examination of these characteristic properties may give into an insight to the reason why some systems show excellent wear characteristic.

Keywords: PVD, properties of coatings, analysis, milling cutter, durability, wear resistance
Grants and funding:

The research has been supported by the project TP 4/2014: Analysis of degradation processes of modern materials used in agricultural technology; financed by IGA AF MENDELU.

Prepublished online: October 29, 2015; Published: December 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Hudeček, P., & Dostál, P. (2015). Analysis of Properties of Hard Coatings and Wear Resistance of Chemical Vapour Deposition (PVD) Coated Technology. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 63(5), 1477-1483. doi: 10.11118/actaun201563051477
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BACH, F. W., LAARMANN, A., WENZ, T. 2004. Modern Surface Technology. Weinheim: Wiley.
    2. BAUER H. D., ARNOLD, B., BARTSCH, K. et al. 1999. Manufacturing and structure investigation of Ti-Al2O3 - multilayers. NanoStructured Materials, 11(8): 1101-1109. DOI: 10.1016/S0965-9773(99)00400-6 Go to original source...
    3. CEME NOC. 2004. Kunden Magazin fur Beschichtungstechnologie. Tools, 17(September).
    4. CSELLE, T., MORSTEIN, M., HOLUBAR, P. et al. 2002. Nanostructured coatings and processes on an industrial scale. In: Gorham Conference. Atlanta.
    5. BOUZAKIS, K. D., MICHAILIDIS, N., VIDAKIS, N., EFSTATHIOU, K. 2001. Failure mechanisms of physically vapour deposited coated hardmetal cutting inserts in turning. Laboratory for machine tools and manufacturing. Thessaloniki, Greece, Elsevier, Wear 248, 29-37. DOI: 10.1016/S0043-1648(00)00494-4 Go to original source...
    6. MATTOX, D. M. 2003. The Foundations of vacuum coating technology. New York: Noyes/William publishing. Go to original source...
    7. MELLOR, B. G. 2006. Surface Coatings for Protection Against Wear. Cambridge, UK: Woodhead Publishing. Go to original source...
    8. MILTON, C. S. 1994. Tool life. Arizona State University, Arizona: Noyes publication.
    9. OERLIKON BALZERS. ©2014. Hi-tech industrial group. Switzerland: Pfäffikon.
    10. PLATIT AG. Advanced Coating Systems. Grenchen, Switzerland.
    11. PRENGEL, H. G., JINDAL, P. C., WENDT, K. H. et al. 2001. A new class of high performance PVD coatings for carbide cutting tools. Surface and Coatings Technology, 139: 25-34. DOI: 10.1016/S0257-8972(00)01080-X Go to original source...
    12. SHINSAKU, H., JUNSUKE, F. 1994. Ceramic coated cutting tools. Key Engineering Materials, 96: 197-220. Go to original source...
    13. VEPŘEK, S., VEPŘEK-HEIJMAN, M. J. G. 2008. Industrial applications of superhard nanocomposite coatings. Surgace & Coatings Techology, 202(5). Go to original source...
    14. ZHANG, S., ALI, N. 2007. Nanocomposite thin films and coatings. Processing, properties and performance. Imperial college press. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content