Acta Univ. Agric. Silvic. Mendelianae Brun. 2014, 62(5), 1033-1040 | DOI: 10.11118/actaun201462051033

Methodology for Determining the Cutting Conditions in Drilling of Automated Manufacturing

Darina Matisková1, Martin Kotus2
1 Faculty Manufacturing of Technology whit seat in Prešov, Technical University in Košice, Bayerova 1, 080 01 Prešov, Slovak Republic
2 Department of Quality and Engineering Technologies, Faculty of Engineering, Slovak University of Agriculture, Tr. A. Hlinku 2, 949 76 Nitra, Slovak Republic

Hole machining is quite common in engineering technology. It follows from the requirements of the specific holes used not only for arranging various types of shafts and axis but also for jointing parts and other purposes. This paper illustrates methodology and experiments for determination of optimal cutting conditions and appropriate cutting tools based on an example of drilling. The choice of drilling technology is based on the design requirements for the shape and dimensions, namely the nature of semi-finished product, with regards to the requirements of quality, reliability and economic efficiency.

Keywords: optimal cutting conditions, hole drilling, tool wear criteria, quality, economics efficiency

Published: December 2, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Matisková, D., & Kotus, M. (2014). Methodology for Determining the Cutting Conditions in Drilling of Automated Manufacturing. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 62(5), 1033-1040. doi: 10.11118/actaun201462051033
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BALOG, M., TOMÁŠOVÁ, D. 2005. Company innovation strategy. Visnik Kiivskovo Nacionaľnovo Targoveľno-Ekonomičnovo Universitetu. 2: 45-51.
    2. FLIMEL, M. 2013. Differences Ug - values of glazing measured in situ with the influence factors of the internal environment. Advanced Materials Research, 649: 61-64. DOI: 10.4028/www.scientific.net/AMR.649.61 Go to original source...
    3. FÜRBACHER, I., MACEK, K., STEIDL, J. 2006. Lexikon technických materiálů. Verlag Dashöfer. CES EduPack 2006, Granta Design Ltd., Cambridge, UK.
    4. LAZAR, I., HUSÁR, J. 2013. Verification of sequential patterns in production using information entropy. Technicki Vjesnik, 20(4): 669-676.
    5. MODRÁK, V., MOSKVICH, V. 2012. Impacts of RFID implementation on cost structure in networked manufacturing. International Journal of Production Research, 50(14): 3847-3859. DOI: 10.1080/00207543.2011.594968 Go to original source...
    6. PANDOVÁ, I., PANDA, A., JURKO, J. 2011. Testovanie klinoptilolitu ako sorbenta oxidov dusíka z výfukových plynov spaľovacích motorov. Chemické listy: Material in Engineering Practice, 105(S): 609-611.
    7. PANDA, A., JURKO, J., DŽUPON, M., PANDOVÁ, I. 2011. Optimalizácia tepelného spracovania ložiskových krúžkov s cieľom eliminovať deformácie material. Chemické listy, 105(S): 459-461.
    8. VASILKO, K., BOKUČAVA, G. 1991a. Technológia automatizovanej strojárskej výroby. Bratislava: ALFA, 275 s.
    9. VASILKO, K., HRUBÝ, J., LIPTÁK, J. 1991. Technológia obrábania a montáže. Bratislava: Vydavateľstvo Alfa, š.p.
    10. VOTAVA, J., ČERNÝ, M., FILÍPEK, J. 2007. Abrazivní opotřebení plužních čepelí z ADI litiny. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, LV(1): 173-182. DOI: 10.11118/actaun200755010173 Go to original source...
    11. VOTAVA, J. 2013. Influence of edge radius of sintered-carbide tip on roughness of machined surface. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, LXI(5): 1497-1504. DOI: 10.11118/actaun201361051497 Go to original source...
    12. VOTAVA, J., BEDNÁŘ, R., FAJMAN, M., CHRÁST, V. 2011. Combined systems of anticorrosion protection. In: Deterioration, Dependability, Diagnostics. Brno: University of Defence Brno, 249-256.
    13. VOTAVA, J., ŽÁK, M., KOTUS, M. 2013. Influence of used steel on quality and tolerance of zinc coating to corrosion. In: Deterioration, Dependability, Diagnostics. Brno: University of Defence, 47-52.

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content