Acta Univ. Agric. Silvic. Mendelianae Brun. 2011, 59(5), 31-38 | DOI: 10.11118/actaun201159050031
Proportional monitoring of the acoustic emission in crypto-conditions
- Ústav techniky a automobilové dopravy, Mendelova univerzita v Brně, Zemědělská 1, 613 00 Brno, Česká republika
The work is aimed at studying corrosion and fatigue properties of aluminum alloys by means of acoustic emission (AE). During material degradation are acoustic events scanned and evaluated. The main objective of the article is a description of behavior of aluminum alloys degraded in specific conditions and critical degradation stages determination. The first part of the article describes controlled degradation of the material in the crypto-conditions. The acoustic emission method is used for process analyzing. This part contains the AE signals assessment and comparing aluminium alloy to steel. Then the specimens are loaded on high-cyclic loading apparatus for fatigue life monitoring. Also, the synergy of fatigue and corrosion processes is taken into account.
The aim is the description of fatigue properties for aluminum alloys that have already been corrosion-degraded. Attention is also focused on the structure of fatigue cracks. The main part of the article is aimed at corrosion degradation of aluminium alloys researched in real time by means of AE. The most important benefit of AE detection/recording is that it provides information about the process in real time. Using this measurement system is possible to observe the current status of the machines/devices and to prevent serious accidents.
Keywords: acoustic emission, AE, corrosion, aluminium alloys, degradation, crypto-conditions, mechanical loading, fatigue loading, fatigue crack
Grants and funding:
This study was supported and financed by the internal grant agency of the Mendel University in Brno - Faculty of Agronomy, No. IP 10/2010.
Received: February 1, 2011; Published: March 23, 2014 Show citation
ACS | AIP | APA | ASA | Harvard | Chicago | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- HELLIER, CH., 2003: Handbook of Nondestructive Evaluation. McGraw-Hill, 603 p. ISBN 0-07-028121-1.
- VARGEL, CH., 2004: Corrosion of Aluminium. Elsevier Ltd., 626 p. ISBN 0-08-044495-4.
- DAVIS, J. R., 2000: Corrosion. ASM International, 563 p. ISBN 0-87170-641-5.
- MICHNA, Š. a kol., 2005: Encyklopedie hliníku. Adin, s.r.o., 718 s. ISBN 80-89041-88-4.
- BROOKS, CH. R., 2002: Failure analysis of engineering materials. MC GRAW - HILL, 602 p. ISBN 0-07-135758-0.
- DAVIS, J. R., 1999: Corrosion of aluminium and aluminium alloys. ASM International, ISBN 0-87170-641-5.
- KOPEC, B., 2008: Nedestruktivní zkoušení materiálů a konstrukcí. Akademické nakladatelství CERM, 571 s. ISBN 978-80-7204-591-4.
- KREIDL, M., ŠMÍD, R., 2006: Technická diagnostika. Nakladatelství BEN - technická literatura, 406 s. ISBN 80-7300-158-6.
- MACHEK, V., SODOMKA, J., 2001: Nauka o materiálu: kovy a kovové materiály. ČVUT, 207 s. ISBN 80-01-02424-5.
Go to original source...
- BLITZ, J., SIMPSON, G., 1991: Ultrasonic Methods of Non-Destructive Testing. Springer-Verlag New York, LLC.
- ČERNÝ, M. a kol., 1984: Korozní vlastnosti kovových konstrukčních materiálů. Praha: SNTL, 264 s.
- VLAŠIC, F., 2007: Provozní a korozní degradace ocelových lan. Brno: VUT-FSI, 80 s.
- DAKEL [online]. [2011-01-06]..
- VUT FSI [online]. [2011-01-08]..
- VARNER, D., VARNER, M.: CorrosionFatigue: Korozní únava a akustická emise [online]. [2010-11-14]..
This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.