Acta Univ. Agric. Silvic. Mendelianae Brun. 2005, 53(2), 145-154 | DOI: 10.11118/actaun200553020145
Duplexní ochrana proti korozní degradaci
- Ústav techniky a automobilové dopravy, Mendelova zemědělská a lesnická univerzita v Brně, Zemědělská 1, 613 00 Brno, Česká republika
Předkládaná práce zpracovává problematiku protikorozní ochrany ocelí aplikací duplexního povlaku Zn + Komaxit. Syntéza rešeršních poznatků a experimentálních prací přináší nové poznatky z deskripce korozního poškození, vytváření duplexních vrstev, specifikace technologie přípravy a aplikace práškových hmot. Dále verifikuje zkušební metodiku pro laboratorní hodnocení korozního napadení zkušebních vzorků vycházející z ČSN ISO a aplikace světelné metalografie. Detekuje razantní prodloužení životnosti ocelových materiálů s vrstvou žárově naneseného zinku při následném využití vlastností práškové hmoty (Komaxit). Souhrn uvedených výsledků a závěrů práce je cíleně zaměřen do podmínek technické praxe, kde aplikace tzv. duplexů zajistí výrazné zvýšení životnosti ocelových konstrukcí.
ochrana oceli, zinek, komaxit, SO2, NaCl, korozní komory, metalografie
Duplicate protection against the corrosion degradation
Aplication of hot-dip galvanized objects proves advantage full protection of steel components by zinc. Not only in industrial aglomeration but in this time ingeneral increased concentration of SO2 can be observed. SO2 and NaCl contribute to degradation of zinc protection in such a level that is necessary to provide protection of zinc cover against above mentioned corrosion activators.
The test results completly proved high duality of the anti-corroison protection of the duplex Zn + Komaxit. On the photos it is possible to observe that in the aggressive enviroment salt is the pernament still protection by this technological procedure out standing under aspect of life - extention of component and constructions elements. The pernament protection is essential from the point of view begining as well as the prognose of the coroison.
There is no doubt that expected of the anticorrosion quality of the protective Komaxit cover also very good mechanical charakteristics. Out of the test results it is clearly that the komaxit cover fixed on the protective zinc cover increase quality cover from the perspective of the functional as well as estetical.
Keywords: protection of steel, zinc, Komaxit, SO2, NaCl, corrosion chambers, metalography
Grants and funding:
Publikované výsledky jsou součástí řešení VZ MŠMT 4321 00001.
Received: October 27, 2004; Published: December 28, 2014 Show citation
References
- HRSTKA, J., MÍŠEK, B.: Koroze a povrchová úprava kovů, VUT Brno, 1973.
- ČLUPEK, O., DAVIDOVÁ, H.: Protikorozní ochrana, GAS Praha, 1997, ISBN 80-902339-8-8.
- BARTONÍČEK, R.: Koroze a protikorozní ochrana kovů. NČSAV Praha, 1966.
- SUCHÁNEK, V. a spol.: Speciální technologie povrchových úprav, ČVUT Praha, 1990.
- Hot-Dip Galvanizing for Corrosion Protection of Steel Products, American Galvanizers Association, Englewood, 2000.
- PIVODA, P. a spol.: Poslední vývoj v oblasti výroby pozinkovaných a pohliníkovaných plechů ve světě a jeho odraz v ČSSR, Hutnické aktuality č. 11, 1988.
- Zinc Coatings-Microstructures of Various Zinc Coatings, American Galvanizers Association, Englewood, 2000.
- PROKEŠ, Z. a spol.: Zpráva k problematice žárového zinkování plechů, Ostrava, 1998.
- HÄNSEL, G.: Beitrag zur Feuerverzinkung von aluminiumberuhigten, unlegierten Stählen, Metall, No. 9, 1983.
This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.