Acta Univ. Agric. Silvic. Mendelianae Brun. 2016, 64(3), 893-899 | DOI: 10.11118/actaun201664030893
Experimental Comparison of the Tribological Properties of Selected Surfaces Created by Thermal Spraying Technology
- Department of Machine Design, Faculty of Engineering, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 76 Nitra, Slovak Republic
The scientific article titled "Experimental comparison of the tribological properties of selected surfaces created by thermal spraying technology" deals with the surface condition of selected pairs working within the mixed friction before and after experimental tests. Based on the chosen methodology, the experimental tests were performed on the Tribotestor M'06 testing machine. The ecological oil MOGUL HEES 46 (manufactured by Paramo) was used as a lubricant. The tests were performed on selected material pairs. The first friction element was a shaft of steel 14 220. The second friction element was a steel plate of steel 11 373 with a friction surface created by two materials, i.e. CuSn10 and NP 40. The results are statistically elaborated and illustrated in figures and tables.
Keywords: journal bearing, flame-powder coating, thermal spraying
Prepublished online: July 4, 2016; Published: July 1, 2016 Show citation
| ACS | AIP | APA | ASA | Harvard | Chicago | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- CHOŤEBORSKÝ, R., KUČERA, M., HERÁK, D. 2013. Effect of the welding parameters on the hardfacing abrasive wear. Scientia Agriculturae Bohemica, 44(4): 232-236. DOI: 10.7160/sab.2013.440406
Go to original source... - KOSIBA, J., HUJO, Ľ., TULÍK, J., RAŠO, M. 2013. Study of the impact of synthetic fluid on the lifetime of hydraulic pump. Advanced Materials Research, 801: 7-12. DOI: 10.4028/www.scientific.net/AMR.801.7 Go to original source...
- KROČKO, V., ÁLLÓ, Š., KORENKO, M., ŽITŇANSKÝ, J. 2008. Valuation of the technologies of surface treatments for automobile components. In: Naučni trudove: zemedelska technika i technologii, agrarni nauki i beterinarna medicina, remont i nadeždnosť. Ruse, Bulgaria: Angel Kanchev University of Ruse, 76-80.
- KUČERA, M., CHOŤEBORSKÝ, R. 2013. Analysis of the process of abrasive wear under experimental conditions. Scientia Agriculturae Bohemica, 44(2): 102-106. DOI: 10.7160/sab.2013.440206 Go to original source...
- KUČERA, M., TKÁČ, Z. 2010. Analysis of biodegradable oil on synthetic basis in a variable displacement axial piston pump of swash plate. Acta Facultatis Technicae, 15(1): 81-88.
- MAJDAN, R., TKÁČ, Z., TULÍK, J., KOSIBA, J., ZIGIŇ, P., BUREŠ, Ľ. 2010. Vyhodnotenie skúšky ekologickej hydraulickej kvapaliny na základe prietokovej účinnosti hydrogenerátora. Acta Technologica Agriculturae, 13(3): 61-64.
- TKÁČ, Z., MAJDAN, R., DRABANT, Š., JABLONICKÝ, J., ABRAHÁM, R., CVÍČELA, P. 2010. The accelerated laboratory test of biodegradable fluid type 'ERTTO'. Research in Agricultural Engineering, 56(1): 18-25. Go to original source...
- TÓTH, F., RUSNÁK, J., BELOEV, C. I., KADNÁR, M., PÁLEŠ, D. 2014. The study of geometrical changes of a given sliding couple caused by the influence of operation. 1st ed. Ruse: Angel Kanchev University of Rousse.
This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.