Acta Univ. Agric. Silvic. Mendelianae Brun. 2016, 64(1), 31-42 | DOI: 10.11118/actaun201664010031

Verification of the Quality of the Weld When Utilising the MAG/CO2 Method

Michal Černý1, Petr Dostál1, Pavel Mazal2, Michal Šustr1
1 Department of Technology and Automobile Transport, Faculty of AgriSciences, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
2 Faculty of Mechanical Engineering, Brno University of Technology, Antonínská 548/1, 601 90 Brno, Czech Republic

In contribution there is described the process of welding by using MAG/CO2 method, mechanical (post fact) and nondestructivein situ) measurement including the discussion of results. The materials of various welding have been used for test. According to ČSN 420002 steel with mark 11 373 has been chosen as a material with guaranteed welding and steel with mark 19 312 has been chosen as a material with hard welding. The sheets with dimensions 30×5×250 mm have been used at welding. The source activity having affect in process of welding is caught on AE records. It is described as per affirmatived forms of individual hits and overshoots at active levels directly into obtained records. The discussion links the findings from visual monitoring of mechanical tests, metallographic and factual monitoring even the acoustic tests. In the field of welding verification stated by producer of steel semifinished products the difference between material with guaranteed welding and material with hard welding by using AE method has been confirmed.

Keywords: MAG/CO2 method, acoustic emission, welding, metallography
Grants and funding:

The research has been supported by the project IP 10/2015 "Degradation properties of welded joints" financed by IGA AF MENDELU. This work is an output of research and scientific activities of NETME Centre, regional R&D centre built with the financial support from the Operational Programme Research and Development for Innovations within the project NETME Centre (New Technologies for Mechanical Engineering), Reg. No. CZ.1.05/2.1.00/01.0002 and, in the follow-up sustainability stage, supported through NETME CENTRE PLUS (LO1202) by financial means from the Ministry of Education, Youth and Sports under the "National Sustainability Programme I".

Prepublished online: February 29, 2016; Published: April 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Černý, M., Dostál, P., Mazal, P., & Šustr, M. (2016). Verification of the Quality of the Weld When Utilising the MAG/CO2 Method. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(1), 31-42. doi: 10.11118/actaun201664010031
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. AMBROŽ, O. 2005. Technologie svařování. 1. vyd. Ostrava: ZERROS.
    2. ASTM. 2001. Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding. E 751 - 01. West Conshohocken: The American Society for Testing and Materials.
    3. ČERNÝ, M., DOSTÁL, P. 2014. Adhesion of Zinc Hot-dip Coatings. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 62(1): 53-64. DOI: 10.11118/actaun201462010053 Go to original source...
    4. DOSTÁL, P., COMMUNEAU, P. 2014. Visualisation of Corrosion Acoustic Signals Using Quality Tools. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 62(1): 65-69. Available at: http://acta.mendelu.cz/62/1/0065/. DOI: 10.11118/actaun201462010065 Go to original source...
    5. DOSTÁL, P., ČERNÝ, M., LEV, J., VARNER, D. 2011. Proportional monitoring of the acoustic emission in crypto-conditions. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 59(5): 31-38. DOI: 10.11118/actaun201159050031 Go to original source...
    6. DOUBRAVSKÝ, M., MACÁČEK, I. and MACHÁČEK, Z., ŽÁK, J. 1985. Technologie slévání, tváření a svařování. Brno: Vysoké učení technické v Brně.
    7. HLUCHÝ, M., KOLOUCH, J. 2002. Strojírenská technologie 1 - 1. díl Nauka o materiálu. 1. vyd. Praha: Scientia, spol. s r. o.
    8. HLUCHÝ, M., MODRÁČEK, O., PAŇÁK R. 2002. Strojírenská technologie 1 - 2. díl Metalografie a tepelné zpracování. 1. vyd. Praha: Scientia, spol. s r. o.
    9. KOPEC, B., FIALA, J., VLACH, B. et al. 2008. Nedestruktivní zkoušení materiálů a konstrukcí. In: Nauka o materiálu 4. Brno: Akademické nakladatelství CERM, s. r. o. Brno.
    10. NDT. ©2013. NDT. [Online]. Available at: www.ndt.cz. [Accessed: 13 August 2013].
    11. NOHÁL, L., MAZAL, P., TOPOLÁŘ, L., PAZDERA, L. 2012. Metoda akustické emise v hodnocení kvality odporového bodového svařování. In: NDE for Safety/Defektoskopie 2012, 42. Mezinárodní konference - sborník příspěvků.
    12. NOREK, I. 2005. Teoretický úvod k cvičení z předmětu Technologie I. [Online]. Available at: http://u12133.fsid.cvut.cz/podklady/TE1/def_kontrola_sv.pdf. [Accessed: 15 May 2013].
    13. PARIZEK, P. 2011. Svářečská škola Česká Třebová. [Online]. Available at: http://www.svarecskaskola.euweb.cz/. [Accessed: 12 August 2013].
    14. SUCHÁNEK, J. 2009. Shrnutí látky, 22. duben 2009. [Online]. Available at: http://www.unium.cz/materialy/cvut/fs/shrnuti-latky-m5410-p3.html. [Accessed: 12 August 2013].
    15. VOTAVA, J., KUMBÁR, V., DOSTÁL, P. 2014.Degradation processes of Al-Zn welded joints. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 62(3): 571-578. DOI: 10.11118/actaun201462030571 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content