Acta Univ. Agric. Silvic. Mendelianae Brun. 2015, 63(1), 39-43 | DOI: 10.11118/actaun201563010039

Application of Radar Chart in the Selection of Material for Clutch Plates

Tomáš Holota1, Martin Kotus1, Mária Holienčinová2, Jan Mareček3, Martin Zach4
1 Department of Quality and Engineering Technologies, Faculty of Engineering, Slovak University of Agriculture, Tr. A. Hlinku 2, 949 76 Nitra, Slovak Republic
2 Department of Marketing, Faculty of Economics and Management, Slovak University of Agriculture, Tr. A. Hlinku 2, 949 76 Nitra, Slovak Republic
3 Department of Agriculture, Food and Environmental Engineering, Faculty of Agronomy, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
4 Expert Engineering Department, Institute of Lifelong Learning, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic

Article deals with the choice of material used for manufacturing of clutch plates using graphical analysis. For analysis of used materials and specified parameters were chosen method of radar chart. Radar chart shows visually and quantitatively individually parameters used for the selection of material. The correct selection of the material has effect on the effectiveness and efficiency of manufacturing of clutch plate.

Keywords: radar chart, clutch, yield strength, ultimate strength, elongation, hardness
Grants and funding:

This publication was developed in relation to the "OP VK CZ.1.07/2.3.00/30.0031 Postdoctoral Project in Technical and Economical Disciplines of MENDELU" with TF SPU Nitra and ÚZPET AF MENDELU cooperation.

Prepublished online: March 14, 2015; Published: April 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Holota, T., Kotus, M., Holienčinová, M., Mareček, J., & Zach, M. (2015). Application of Radar Chart in the Selection of Material for Clutch Plates. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 63(1), 39-43. doi: 10.11118/actaun201563010039
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BURDA, M., ČIČO, P., BUJNA, M. 2010. Posúdenie rizika pracovného miesta komplexnou metódou. In: Kvalita a spoľahlivosť technických systémov 2010. Nitra: SPU.
    2. HRUBEC, J. 2001. Riadenie kvality. Nitra: SPU.
    3. HRUBEC, J., ŽARNOVSKÝ, J. et al. 2009. Integrovaný manažérsky systém. Nitra: SPU.
    4. INGALDI, M., JURSOVA, S. 2013. Wykorzystanie metody Servqual do badania satysfakcji klientów punktu obsługi indywidualnego klienta dystrybucji gazu. Rynek Energii, 4(107): 43-47.
    5. KONSTANCIAK, M. 2012. Analysis of technological strategies on the example of the production of the tramway wheels. Archives of Materials Science and Engineering, 57(2): 69-74.
    6. KREDATUSOVÁ, M., BUJNA, M. 2010. Identifikácia a analýza ohrozenia vo vybranom procese. In: Najnovšie trendy v poľnohospodárstve, v strojárstve a odpadovom hospodárstve. Nitra: SPU.
    7. LESTYÁNSZKA (ŠKŮRKOVÁ), K. 2009. Spôsobilosť procesu sústruženia pri výrobe skrutiek. In: Kvalita a spoľahlivosť technických systémov 2009. Nitra: SPU.
    8. LESTYÁNSZKA (ŠKŮRKOVÁ), K. 2012. The statistical regulation of the turning process. Research papers Faculty of Materials Science and Technology Slovak University of Technology in Trnava, 20(Special Number): 81-85. Go to original source...
    9. MATISKOVÁ, D. 2012. The Methodology of Economics Costs Influential on Automation of Component Production. American Journal of Economics, 7: 164-170. DOI: 10.5923/j.economics.20120207.02 Go to original source...
    10. MATISKOVÁ, D. 2013a. Selected methods from quality and automation of management production. Brno: Tribun.
    11. MATISKOVÁ, D. 2013b. Working process optimization and minimization of production costs. Strojárstvo, 55(3): 231-235.
    12. NENADÁL, J. 2004. Měření v systémech managementu jakosti. 2. doplněné vydání. Praha: Management Press.
    13. PLURA, J. 2001. Plánování a neustále zlepšování jakosti. Praha: Computer Press.
    14. TAGUE, N. 2005. Quality Toolbox. Second edition. Milwaukee: ASQ Quality Press.
    15. VOTAVA, J. 2013a. Influence of edge radius of sintered-carbide tip on roughness of machined surface. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 61(5): 1497-1504. DOI: 10.11118/actaun201361051497 Go to original source...
    16. VOTAVA, J. 2013b. Influence of roughness of Machined Surface on Adhesion of Anticorrosion System. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 61(6): 1889-1896. DOI: 10.11118/actaun201361061889 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY NC ND 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content